Interior Painting
OUR INTERIOR PAINTING PROCESS INCLUDES THE FOLLOWING:
- Apply one coat of primer to all walls and ceilings. The primer will be Fresh Start Ben Moore Latex.
- Fine preparation of all walls and ceilings using spotlights to find imperfections. Light spacing and floating at large voids where trims meet drywall to ensure clean, straight lines.
- Fill all nails, holes, and joints with either wood filler and Bondo for all casings, crowns, baseboards, wainscoting, specialty trims, and cabinetry as specified.
- Application of 2 finish coats using environmentally friendly Ben Moore Regal Flat or Sherwin Williams paint for all walls and ceilings. (All surfaces will be inspected, sanded, and wiped clean between coats.)
- Sand all trims, cabinetry, and millwork with sandpaper.
- Applying one Ben Moore Oil Enamel Underbody coat to all trims, cabinetry, and millwork.
- Complete cleaning of all areas to remove dust before commencing finish coats.
- All trims, cabinetry, and millwork will be wiped down with denatured alcohol, helping to remove all surface dust the day the finish coats start.
- Caulking of all trims.
- Sanding and correction of any imperfections that may have been missed between coats.
- Protection of all finished surfaces before work commences. This includes papering all floors, taping all windows, covering all tiles and stone surfaces, covering all finished millwork, protecting all decorative hardware and plumbing fixtures, etc.
- Daily clean up and removal of all debris.
Our service is available in the following areas: Greenwich, Darien, New Canaan, Ridgefield, Rowayton, Stamford, Fairfield, Westport, Weston, Easton, Wilton, Milford and surrounding areas.
Contact us for a FREE estimate today!